OSHA Reveals Top Ten Cited Categories for 2017

From the OSHA blog:

Labor’s Occupational Safety and Health Administration releases a preliminary list of the 10 most frequently cited safety and health violations for the fiscal year, compiled from nearly 32,000 inspections of workplaces by federal OSHA staff. One remarkable thing about the list is that it rarely changes.

Year after year, inspectors see thousands of the same on-the-job hazards, any one of which could result in a fatality or severe injury. More than 4,500 workers are killed on the job every year, and approximately 3 million are injured, despite the fact that by law, employers are responsible for providing safe and healthful workplaces for their workers. If all employers simply corrected the top 10 hazards, we are confident the number of deaths, amputations and hospitalizations would drastically decline. Consider this list a starting point for workplace safety:

  1. Fall protection
  2. Hazard communication
  3. Scaffolds
  4. Respiratory protection
  5. Lockout/tagout
  6. Powered industrial trucks
  7. Ladders
  8. Machine guarding
  9. Electrical wiring
  10. Electrical, general requirements

It’s no coincidence that falls are among the leading causes of worker deaths, particularly in construction, and our top 10 list features lack of fall protection as well as ladder and scaffold safety issues. We know how to protect workers from falls, and have an ongoing campaign to inform employers and workers about these measures. Employers must take these issues seriously. We also see far too many workers killed or gruesomely injured when machinery starts up suddenly while being repaired, or hands and fingers are exposed to moving parts. Lockout/tagout and machine guarding violations are often the culprit here.

Proper lockout/tagout procedures ensure that machines are powered off and can’t be turned on while someone is working on them. And installing guards to keep hands, feet and other appendages away from moving machinery prevents amputations and worse. Respiratory protection is essential for preventing long term and sometimes fatal health problems associated with breathing in asbestos, silica or a host of other toxic substances. But we can see from our list of violations that not nearly enough employers are providing this needed protection and training.

The high number of fatalities associated with forklifts, and high number of violations for powered industrial truck safety, tell us that many workers are not being properly trained to safely drive these kinds of potentially hazardous equipment. Rounding out the top 10 list are violations related to electrical safety, an area where the dangers are well-known. Our list of top violations is far from comprehensive.

OSHA regulations cover a wide range of hazards, all of which imperil worker health and safety. And we urge employers to go beyond the minimal requirements to create a culture of safety at work, which has been shown to reduce costs, raise productivity and improve morale.

To help them, we have released new recommendations for creating a safety and health program at their workplaces. We have many additional resources, including a wealth of information on our website and our free and confidential On-site Consultation Program. But tackling the most common hazards is a good place to start saving workers’ lives and limbs.

Learn more about MHI’s Forklift Operator Safety Training, and contact us to be sure your operators are trained to properly operate the forklifts you own, under the conditions you operate. Well-trained forklift operators are more productive, less costly and more profitable for your material handling operation.

Well-maintained forklifts are also more productive, safer and have a longer useful life. Find out more about how we can help you keep your forklift fleet operating at peak efficiency and safety at our material handling equipment services page.

Contact us to learn more at 888-865-2083.

Advertisements

When is Forklift Operator Refresher Training Required?

By now we all know that anyone that operates lift trucks in your facility MUST be trained to do so. This training needs to be done on YOUR type of equipment, operated in YOUR facility. But when does and operator need to be “refreshed” on forklift operator training, and why? OSHA States:

1910.178(l)(4)(i) – Refresher training, including an evaluation of the effectiveness of that training, shall be conducted as required by paragraph (l)(4)(ii) to ensure that the operator has the knowledge and skills needed to operate the powered industrial truck safely.
1910.178(l)(4)(ii) – Refresher training in relevant topics shall be provided to the operator when:
1910.178(l)(4)(ii)(A) – The operator has been observed to operate the vehicle in an unsafe manner;
1910.178(l)(4)(ii)(B) – The operator has been involved in an accident or near-miss incident;
1910.178(l)(4)(ii)(C) – The operator has received an evaluation that reveals that the operator is not operating the truck safely;
1910.178(l)(4)(ii)(D) – The operator is assigned to drive a different type of truck; or
1910.178(l)(4)(ii)(E) – A condition in the workplace changes in a manner that could affect safe operation of the truck.
1910.178(l)(4)(iii) – An evaluation of each powered industrial truck operator’s performance shall be conducted at least once every three years.

This means that when you hire a new forklift operator, or someone that might operate a forklift for any reason in your facility, you need to find out what type of equipment they have been trained to operate, how and under what conditions. If your new employee previously operated electric order pickers in a distribution setting and your operation utilizes IC forklifts used outdoors, your new employee will need refresher training using your type of equipment under your conditions. This condition would apply under sections D and E as outlined above.

This could also be said for a current employee transferring from another facility that uses different types of attachments or moves different kinds of products. You would need to provide hands-on training and evaluation for your equipment, how to use it, what it does to capacity rating and how to safety maneuver your goods around your facility.

A new employee may have had training at a previous job, using similar equipment under similar conditions. If however, you as a supervisor determine that the new employee is not exhibiting sufficient knowledge of forklift safety, complete training may be an order. OSHA doesn’t address every situation and condition in it’s standard 1910.178, but it is up to us to carefully evaluate our operators on a regular basis and determine if we think refresher training is needed, or if an employee needs to undergo complete training.

Our goal is to help you achieve the safest and most productive workplace in Chicago. if you feel you could use a partner in Forklift Operator Training, please Contact Us, or give us a call at 888-865-2083.